avada-plumber@2x

Solution is the rubber sleeve

Joining sewer pipes of different materials and sizes.

Don't know how to connect PVC and Eternit pipes?

Do you need to connect your new KG PVC duct to an old iron pipe, but don't have an intermediate fitting?

I often encounter a very poor joint design when owners try to seal their home-built pipe with foam, with varying degrees of success. In most cases, this type of joint always leaks.

When building, repairing or replacing broken sections of a sewer, it must be taken into account that pipes made of different materials are mostly of different sizes, both outside and inside. During every repair, it must be ensured that, if there is no pipe made of the same material or if we cannot obtain it, we always replace the section to be replaced with a pipe of the closest possible size. There can usually be a few millimetres of difference in the case of pipes of similar size but different materials. It must always be ensured during installation that the drain is the pipe with the larger internal cross-section. Usually, the fitting can be the problem.

For pipes of different materials and sizes, there is no fitting or sleeve that is one half this way and the other half that way. I could even say that there is no fitting made of half different materials!

In this case, we have help and we use it in this case, the rubber sleeve!

Megoldás a gumikarmantyú

This fitting is most suitable for precisely fitting pipelines of different materials and sizes.

With the help of the clamp, it can be easily tightened to the given size, even a difference of two sizes can be bridged and corrected. The sewage does not leak out and the sewer smell will not find a way to make your life miserable. The rubber sleeve is somewhat resistant to acids and alkalis, and chemicals do not pose a danger, so you do not have to be afraid or impose conditions when using it. The joint will be flexible. Thanks to the flexible joint, there is less chance of breakage and cracking. The clamp is stainless, so you can count on a long service life, even in humid, cool places.

The rubber sleeve is a very important connection piece for channel in assembly and construction. It is important to always make sure of its correct application and accuracy of fit to avoid later annoyances.

All rights reserved, www.magyarendre.hu

Drain Problems: Frequently Asked Questions

How to clean a greasy drain?2023-05-24T09:27:47+02:00

Cleaning clogged drains often involves using degreasers to remove grease and oil from the drain walls. Using hot water can also help dissolve the grease and make it easier to drain.

How to clean a clogged drain at home?2023-05-24T09:27:00+02:00

Unclogging a clogged drain at home often involves using household products like baking soda and vinegar to unclog the clog. In addition, various drain cleaning tools, such as a drain auger, can also be helpful.

How to clean the kitchen drain?2023-05-24T09:25:53+02:00

Cleaning your kitchen drain is important to remove grease, oil, and food residue that can cause blockages. Regular cleaning will help prevent drain blockages and unpleasant odors. A combination of baking soda and hot water can be effective in dissolving grease and oil.

Why does water come back up from the drain?2023-05-24T09:25:15+02:00

If water is backing up through the drain, it is an indication that there is a blockage somewhere in the plumbing system. This problem often occurs in the sink or bathroom where water is not able to flow freely through the pipes. Baking soda is a great natural cleaner that helps dissolve grease and oil in the drain. Simply sprinkle a cup of baking soda down the drain, then pour a cup of hot water over it and let it sit for a few minutes before flushing.

Why is water coming up the floor drain?2023-05-24T09:24:34+02:00

This problem usually occurs when the floor drain becomes clogged and water cannot drain. This is often caused by debris such as hair, soap scum and other substances accumulating in the floor drain. Drain cleaning tools such as a drain cleaning spiral can be helpful in this process.

Why does water come back up from the drain?2023-05-24T09:23:50+02:00

If water is backing up through the drain, it is an indication that there is a blockage somewhere in the plumbing system. This problem often occurs in the sink or bathroom, where water cannot flow freely through the pipes. Liquid drain cleaners are commercial products specifically designed to clean drains. These products often contain strong chemicals that dissolve grease, oil, and food residue in the drain.

Why is the water draining slowly from the shower tray?2023-05-24T09:23:13+02:00

This problem is often caused by a buildup of hair, soap scum, and other substances in your shower drain. These substances slow down the flow of water and can eventually cause a clog. Salt can help unclog the drain. Sprinkle a cup of salt down the drain, then pour a cup of hot water over it and let it sit for a few minutes before flushing.

Why isn't the water draining from the sink?2023-05-24T09:16:04+02:00

This problem usually occurs when food residue, grease, or oil builds up in the drain, blocking the path of water. Over time, this can cause a blockage that prevents water from draining. You can use baking soda to solve this problem. Simply sprinkle a cup of baking soda down the drain, then pour a cup of hot water over it and let it sit for a few minutes before flushing.

More interesting articles about clogging