In order to be able to remove every blockage with absolute certainty and in a professional manner, we need the right, professional tools in addition to our professional experience. The drain cleaner will assess the problem arising in the given situation and use the right and most suitable tool to remove the blockage.
When clearing blockages, always use the most advanced, state-of-the-art technology machines In their possession, they can effectively combat any blockage problem with the help of the following tools. When clearing blockages, it is not enough to just work with the spiral in the sewage pipe, and since there are many types of blockages, several types of tools are needed.
There are basically 5 types of blockage problems we can encounter at work:
1. caused by paper or hair tufts blockage
2. formed as a result of fat deposits blockage, these are hard types of blockages
3. also fat deposits that have formed over a long period of time and have already become calcified,
hardened materials
4. tree root ingrowths
5. silting
Straight drill, its diameter is the same as the diameter of the pipe cleaning spiral.

Hammer drill, serves to loosen lighter sludge.

Return drill, used to remove jammed rags

Funnel drill It also helps us remove loose sludge.

The type of drill bit used to remove the blockage should always be determined by the type of blockage. The material to be drilled through can be hair, grease, kitchen waste, paper, textiles. These drill bits are attached to the end of the cleaning spiral.
Forked cutting head This tool is suitable for scraping off stubborn grease deposits, cutting them off, and crushing other materials. It can also be used in the case of milder sludge.

Spade head drill A shaped drill bit is recommended for silted drains and more solid blockages.

Spiral sawtooth Cutter head – Works well for shredding overgrown, lighter roots and thinner branches. Recommended for removing tree roots.

Serrated cross-blade drill – Highly efficient tool for drilling through and removing hard blockages, cutting out mortar and lighter concrete,

Chain cleaning heads – After removing the main blockage, it is used to clean the side walls of the pipe network, remove residual grease deposits, and clean the entire pipe cross-section.

Carbide drill bits – can be used effectively for removing carbide edges and the hardest blockages, concrete deposits, limescale, urinary calculus, and gypsum.

Knurled, forked head – recommended for general blockage removal tasks, especially tree root ingrowths and their removal.

Two-way root cutter – for cutting roots, branches, solid materials, in forward and reverse motion.

I hope this post was helpful to you, don't forget that if you have any questions or would like to use my services, feel free to call me at +3620/318-1614, even at night, every day of the year, or contact me at [email protected]!










